SpinetiX SA, Switzerland
13
Update failed
Updating firmware
If the check for updates procedure reported that updates are available for your HMP, an
Update Now
button appears in the page.
Simply click this button to start the update process.
Important
Do not power down the unit during the whole update process.
The HMP will restart automatically once the update process is over. It is possible that the web page displays a time-out error during the
update. However, this has no influence on the update process itself.
At the end of this process, by refreshing your web browser the new firmware version will be reported under section
Current
Versions
. If you click the
Check for Update
button again, the page will report that no updates are available.
Automatic update
If your HMP has automatic update enabled and has direct access to the Internet, it will update its firmware in an automatic and
transparent manner as soon as a firmware is available. The check (and update, if appropriate) will take place at 3:00 AM and will not
modify the content played by the HMP nor the display and networks settings.
Automatic update is not recommended if your HMP is deployed in a production environment.
To enable automatic update:
1.
Check the "Enable automatic updates" check box
2.
Select the update time.
3.
Press Apply to validate your changes