SpinCore Technologies PulseBlasterESR-PRO-200-cPCI, Руководство пользователя

Страница: 14 / 24

PulseBlasterESR-PRO-200-cPCI
MATLAB GUI
The MATLAB GUI provides a simple yet powerful interface for controlling PulseBlaster devices. Similar to the
PulseBlaster.NET interface, outputs are set by using check-boxes, program flow instructions are selected from a
drop-box, and instruction durations are typed in. The full instruction set can be utilized, and multiple devices can
be controlled. Device selection is done by typing in the board's number, and device control is done by clicking
large buttons at the top of the GUI. The MATLAB GUI is compatible with programs from
PulseBlaster.NET.
MATLAB is required for using this GUI. The latest version of MATLAB GUI and download information can be
found at: http://www.spincore.com/support/PulseBlasterMatlabGUI/
http://www.spincore.com 14 2017/01/24
Figure 4: The MATLAB GUI. This GUI controls outputs by using checkboxes, program
flow instructions are performed through drop boxes, and instruction durations are input by
using text. This GUI can control multiple devices, and device control is done by clicking
large buttons. Programs can be saved/loaded/edited with ease.