SpinCore Technologies PBLV-DDS-II, Руководство пользователя

Страница: 8 / 29

SpinCore PulseBlasterDDSII
LabVIEW Extensions
II. Installation
There are two methods of using the PulseBlasterDDS-II LabVIEW Extensions. The first
method is a set of stand-alone executables which will control the PulseBlasterDDS-II
boards with a simple, intuitive interface with no other necessary knowledge of LabVIEW
programming. The second method is a set of LabVIEW VIs which can be used with the
LabVIEW Development platform to create custom programs using the PBLV interface.
Method 1: Stand-Alone Executables
In order for PBLV-DDS-II stand-alone executables to work, the following must be installed:
●
SpinCore Driver Suite - Please see the SpinCore Driver Suite Installation Guide
( http://www.spincore.com/support/spinapi/instructions/ ) for more information.
●
National Instruments LabVIEW Run-Time Engine 2010
( http://www.spincore.com/support/PBLV/LVRTE2010std.exe ) - Note if you have
LabVIEW 2010 or later installed, this is not needed.
●
LabVIEW PulseBlaster Extensions Stand-Alone executables located here .
Method 2: Customizable VIs
In order for PBLV-DDS-II customizable VIs to work, the following must be installed:
●
SpinCore Driver Suite - Please see the SpinCore Driver Suite Installation Guide
( http://www.spincore.com/support/spinapi/instructions/ ) for more information.
●
National Instruments LabVIEW 8.6 or later - If you do not have LabVIEW 8.6 or later
installed, you may download a
30-day evaluation
( https://lumen.ni.com/nicif/us/lveval/content.xhtml ) of the latest LabVIEW
development software.
(NOTE: Customizable VIs for versions of LabVIEW as old as LabVIEW 8.0 are
available. For customizable VIs older than LabVIEW 8.6 please contact SpinCore
Technologies via the
web forum .)
●
LabVIEW PulseBlaster Extensions located here .
(NOTE: Customizable VIs use the C-calling convention. For customizable VIs that
use the WINAPI calling convention please contact SpinCore Technologies via the
web forum .)
8 2011-04-29
www.spincore.com