19/11/2013
Vers. 1.1
19
9. MANUAL procedure
To access the main menu, press any key from the main menu and select the 'Manual' screen:
In the manual procedure the following steps can be performed, one at a time:
Insertion of the washing fluid (A)
Programming and execution of the washing (B)
Emptying of the sump for filter replacement and radiator cleaning (C)
Oil replacement in torque converter (D)
The individual steps are described below.
9.1.
Inserting the washing fluid (A)
This operation is to insert the washing fluid into the lubrication circuit of the transmission: the purpose is to facilitate
the removal of sludge and emulsions, which will be trapped by the station filter.
Mix the washing fluid with the transmission oil in the additive bottle (Fig. 5P) positioned on the back of the station
(ratio 1:1).
Insert the quick coupling of the bottle into its seat.
Select the 'Inserting additive' function (A) and move the cursor to 'ON' using the arrow keys. Press ENTER.
The station will begin to insert the washer fluid into the car and you will see the following screen.
The middle icon indicates that at this stage the car must remain switched off, while the scroll bar and the
percentage indicate how much washing fluid has been inserted. Once this phase is completed, the station will
return to the screen containing all manual functions, thus you can proceed with the actual washing.
9.2.
Washing (B)
The 'Washing' function (B) allows you to select the time required for the washing of the automatic transmission with
the fluid inserted during step (A). Pressing ENTER with the cursor positioned on the B icon you can go to a screen
where you can change the desired time.