IMPORTANT:
The Zero Gravity Micro™ Wall Racer should be driven only on a smooth,
clean, flat surface. Dirt or debris can get inside the fan and cause damage.
To drive on the ground, place the vehicle power switch to the middle
(ground) position. The fan
will not
turn ON, but the vehicle will drive full
function on the ground. (The ground mode saves the battery charge).
Keep Zero Gravity Micro™ away from hair.
USING THE CONTROLLER
DRIVING ON THE GROUND
FORWARD
REVERSE
LEFT TURN
RIGHT TURN
L
R
TRIM
ADJUSTMENT
If the vehicle is not driving straight you
can use the trim adjusters.
2.
If the vehicle
turns to the
LEFT, press
the Right trim
button until it
drives straight.
1.
Set the vehicle in
GROUND
mode and using the Controller,
drive the vehicle
FORWARD.
WHEN FINISHED PLAYING WITH YOUR ZERO GRAVITY MICRO™ WALL RACER
When finished playing with
your Zero Gravity Micro™
Wall Racer:
1
. Turn the controller OFF.
2.
Remove vehicle from wall.
3.
Turn vehicle OFF.
NOTE:
Avoid cleaning the
Wall Racer with alcohol.
1
3
2
3.
If the vehicle
turns to the
RIGHT, press
the Left trim
button until it
drives straight.
The LEFT joystick controls the
vehicle Forward and Reverse.
Push the LEFT joystick forward
and the RIGHT joystick left or
right to control the vehicles’
direction.
