Preparing the acrylic parts
The stands
Peel the protective plastic and paper from the 2 stands, washers and top bezel. For the pieces of paper
that remain on the black acrylic, scratch at a corner with your fingernail, and then lift it away. Be careful
not to scratch, bend or flex the acrylic. If the surface picks up fingerprints, we recommend cleaning
acrylic surfaces with Windex, and a lint free cloth. Never use alcohol based cleaners on acrylic.
Slide a nut into each stand. If the nut keeps sliding out the other side, you can put a small piece of
masking tape on either side to hold it centered in place, until the screws are tight.