78-2600-R - Instructions MAVERICK TRAIL-SPORT-COMMANDER Vent Rear Windshield - rev00
www.spikepowersports.com / 888-769-2295
3
IMPORTANT NOTICES
Torque specifications must be followed when tightening bolts.
Over-tightening any and/or all screws will cause cracks around mounting holes which is not covered by any
warranty.
IMPORTANT NOTICES
TWO
people are required
to install the windshield to the roll cage. Since windshield is wider at the bottom, gentle
manipulation and/or slight bending by each person will be required for windshield to slide all the way down into position.
Warning: Exercise extreme care during the next step in order to ensure that
you do not damage the windshield or vehicle. This is a tight fit.
c)
Install the windshield to the vehicle as shown below.
d)
Install the supplied hardware (Item D) as shown below.
Adjust the position of the windshield and tighten.
Caution: over tightening any hardware could cause
irreversible damage to the windshield.
Gentle manipulation and/or
slight bending
Philips truss screw M6 x 20 (4x)
(
5.0 ± 0.5 N•m / 44 ± 4 lbf•in
)
Shoulder washer
M6 (4x)
Metal plate
hook (4x)
