78-2600-R - Instructions MAVERICK TRAIL-SPORT-COMMANDER Vent Rear Windshield - rev00
www.spikepowersports.com / 888-769-2295
1
INSTALLATION INSTRUCTIONS
CANAM MAVERICK TRAIL/SPORT & 2021 COMMANDER
REAR WINDSHIELD - VENT
PART # 78-2600-R
IMPORTANT NOTICES
READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO
AVOID INJURY TO YOURSELF, DAMAGE TO THE VEHICLE OR ACCESSORY.
•
For proper installation, TWO people are required
.
•
Torque specifications must be followed when tightening bolts. Over-tightening any and/or all screws will cause
cracks around mounting holes which is not covered by any warranty.
•
As specified on carton label, once protective film on shields is removed, product cannot be returned.
•
As specified on carton label, damage caused by packaging staples is not covered by warranty. All staples must be
removed prior to removing product from carton.
•
ANY cutting, trimming, drilling or altering of this product as delivered is not covered under warranty.
•
Failure to follow these installation instructions completely may void any warrantable components and result in
product damage or personal injury.
•
Do not use Loctite/Super Glue or any other similar fastener adhesive. These types of products react to plastics
and cause cracking. Not covered by any warranty.
•
Our windshields are made from the highest quality material providing optimum transparency and clarity.
Blurriness and/or extrusion marks may or may not appear when looking through windshield from a wide, side-
angle. This is normal for all extruded clear plastic materials.
•
The application of improper cleaners, abrasive and/or dirty cleaning towels can severely damage the product.
Failure to follow cleaning recommendation (provided herewith) may void any warrantable components.
DEALER
These instructions contain important information for future reference and must be given to the customer at time of
purchase or upon completion of installation.
Parts List
(parts available with kit only and not available separately)
1. Installation
a)
Find a clean flat area where you can safely lay down the
windshield (Item A). Partially remove the protective film
on both sides and apply the co-extruded bulb seal (Item C)
using manual pressure to ensure good adhesion and cut
any excess.
ITEM
PART NAME
DESCRIPTION
QTY
A
Windshield
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
1
B
Vent assembly
Includes: 1 vent cover, 1 vent flap assembly, 1 rubber vent seal and 7 vent mounting screws
1
C
Co-extruded bulb seal (¼")
Includes: 84" Co-extruded bulb seal (¼") / #77-95BS
[end user to cut to exact length]
1
INSTRUCTION
BAG
D
Windshield Hardware
Includes: 4 metal plate hooks, 4 phillips truss head screws M6 x 20 and 4 plastic shoulder
washers M6
1
Co-extruded bulb seal ¼"
(+/- 83")
