SK1265-AT6
Diesel engine truck
Truck
10-18
SPIERINGS MOBILE CRANES USER MANUAL V 2.9
M
ei
2
0
1
8
Cha
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
1. Remove the central cover plate of the engine cowling;
2. Remove the
filter cover A
) from the
filter casing
B
;
3. Let the filter casing leak off;
4. Remove the filter cover together with the
filter element
C
from the filter casing;
5. Take the filter element out of the filter cover;
6. Clean the filter cover.
7. Replace the O-ring of the filter cover and lightly grease the new O-ring;
8. Mount the new filter element in the filter cover (see
§ 14.1. Maintenance specifications)
;
9. Mount the filter cover with the filter element over the centre pipe and tighten it on the filter
casing by hand;
10. Mount the filter cover with the tightening torque as mentioned on the filter cover;
11. Vent the fuel system (see
§ 10.4.5. Venting fuel system diesel engine truck
12. Start the engine and let it run for a few minutes;
13. Check the fuel system for leakage;
14. Mount the central cover plate to the engine cowling;
15. Fold the crane.
CHECK / TEST!
Timely replace the fuel filter to prevent damage to the engine.
For more information, see § 5.3.1. Maintenance schedule diesel engine truck.
INFORMATION!
When replacing the new filter element, minimize touching the filter.
Touching the filter element may affect the operation of the filter and shorten the
service life.
Picture 10-17