42
The walking foot accessory
Arm (3)
Attaching head (5)
Presser bar attaching screw (2)
Needle screw & clamp (4)
Needle
bar
Presser foot bar (1)
Arm (3)
* The evenfeed foot accessory is optional. It is not included with this
machine.
Always try to sew first without the evenfeed foot accessory, which
should be used only when necessary.
It is easier to guide the fabric and you have a better view of the seam
when using the standard, regular foot on your machine. Your sewing
machine offers excellent stitch quality on a wide range of fabrics, from
delicate chiffons to multiple layers of denim.
The evenfeed Foot accessory equalizes the feeding of the upper and
lower layers of fabric and improves the matching of plaids, stripes and
patterns. It also helps to prevent uneven feeding of very difficult fabrics.
1. Lift the presser foot lifter to raise the presser foot bar (1).
2. Remove the presser foot holder by unscrewing (counterclockwise) the
presser bar attaching screw (2).
3. Attach the evenfeed foot to the machine as follows:
i) The arm (3) should fit above the needle screw and clamp (4).
ii) Slide the plastic attaching head (5) from left to right so it is fitted
into the presser foot bar.
iii) Lower the presser foot bar (1).
iv) Replace and tighten (clockwise) the presser bar attaching screw
(2).
4. Make sure both the needle screw (4) and the presser bar attaching
screw (2) are tightly secured.
5. Draw the bobbin thread up and place both the bobbin thread and the
needle thread behind the walking foot attachment.
