SPIDO 002650 Скачать руководство пользователя страница 14

 

 

 

 

 

When installing the device, please make sure that the motor is sufficiently ventilated. 

 

5.2. 

Installation of the suction line 

  

 

5.

Stationary installation 

 

 

With regard to the electrical connection in the case of stationary installation, please ensure an 

adequate visibility and accessibility of the plug. 

 For stationary installation, please fasten the pump on a suitable, solid surface. To reduce vibration, it is 

recommended to apply an anti-vibration material - for instance a rubble layer - between the pump and the 

installation surface. 

 

 

 

 

 

 

5.

Using the pump for garden ponds and similar places 

 

 

Operating the pump next to garden ponds and similar places is generally only admissible if no 

persons are in contact with the water. 

 If the pump is used for garden ponds and similar places it has to be operated using a residual current circuit-

breaker (FI switch) with a nominal trigger current of 

≤ 30mA (DIN VDE 0100

-702 and 0100-738). Please ask your 

electrical services provider whether your installation site complies with this condition. 

10

The suction line (2) will convey the pumped fluid to the pump. Please screw one of the connection pieces together 

with one of the sealing rings to the check valve (3) and intake filter (4) assembly. Insert the other end of the 

connection piece as far as possible into the suction line, then use a hose clamp to fasten it in this position. In the 

same way, insert another connection into the other end of the suction line and fasten it there using an additional 

hose clamp. Fill the suction line completely with the pumped fluid. Subsequently, please screw the fluid-filled 

suction line together with one sealing ring onto the suction port of the pump. 

 

.3. 

Venting the pump housing 

 

Please remove the closure (10) from the venting port (9) located on top of the pump housing. Subsequently, fill 

the pump housing completely with pumping fluid through the pressure port (5) of the pump. The pump housing is 

fully vented as soon as the liquid to be discharged has mounted up to the edge of the open venting port. 

Subsequently, please close the venting opening again. 

 

.4. 

Installing the pressure line 

 The pressure line (11) will convey the fluid being pumped from the pump to the point of withdrawal. Slide the fuel 

nozzle (6) onto the pressure line, then fasten it in place using one of the hose clamps. Continue by inserting one 

connection piece fully into the other end of the pressure line, and fasten it in that position using another hose 

clamp. Finally, screw the pressure line together with one sealing ring onto the pressure port (5) of the pump. 

 

When handling diesel fuel or fuel oil, smoking is not allowed, and open fire is to be kept off the 

site. Please avoid inhaling the vapours. Ensure sufficient ventilation. Please wipe off any 

spilled diesel fuel, fuel oil or rapeseed oil completely. 

 

All connection lines have to be perfectly tight since leaking lines will affect the performance of the pump and may 

even cause considerable damage. Please use appropriate sealing material to ensure an airtight installation. The 

use of 

37)(

 tape or comparable sealing material is to be avoided since it will be destroyed by diesel fuel, fuel oil 

and rapeseed oil. 

When tightening threaded connections, please do not apply excessive force which may cause damage. When 

laying the connection pipes, you should make sure that the pump is not exposed to any form of weight, vibration 

or tension. Moreover, the connection lines must not contain any kinks or an adverse slope. 
The scope of delivery includes one intake line (2) and one pressure line (11) which were specifically designed for 

the type of fluid to be discharged using the present pump. The lengths of the hoses initially coming with the pump 

are different. For most applications, the shorter hose should be used as a suction hose, whereas the longer hose 

should serve as a pressure line. 

If you are using hoses other than those initially coming with the pump, please do make sure that they are suitable 

for pumping the specific liquid to be discharged. Also, the intake or pressure line should have the same diameter 

as the suction port (1) or pressure port (2) of the pump. 

.5. 

How to position the pump 

 

Please make sure that the pump is standing in a safe and solid position. The device must always be placed 

upright on an even surface. When selecting the installation site, please make sure that possible spilling of the 

liquid being pumped cannot cause any damage.  

The fuel nozzle should always be above the upper level of the pumping fluid. Otherwise, the so-called “siphoning 

effect“ may cause liquid to be discharged despite the fact that the pump is out of operation. 

Содержание 002650



























Отзывы: