SPD-2000 NS - Installation Instructions
STANDARDS COMPLIANCE
This device complies with Part 15 of the FCC Rules and RSS-
210 of Industry and Science Canada.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may, cause
harmful interference to radio communications. Howevethere
is no guarantee that interference will not occur in a particular
installation.
However If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and
receiver.
•
Connect the equipment into an outlet on a circuit
different
•
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV
technician forhelp.
Warning!
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance (Visonic
Technologies Ltd.) could void the user’s authority to operate
the equipment.
PRODUCT WARRANTY
Visonic Technologies Ltd., and its affiliates, (hereinafter collectively referred to as
"the Manufacturer") warrants its products (hereinafter referred to as "the Product”) to
be free of defects in materials and workmanship under normal operating conditions
and use for a period of one year from the date of shipment by the Manufacturer. The
Manufacturer's obligations shall be limited within the warranty period, at its option, to
repair or to replace the defective Product or any defective component or part thereof.
To exercise this warranty, the product must be returned to the manufacturer freight
prepaid and insured.
This warranty does not apply to repairs or replacement caused by improper
installation, Product misuse, failure to follow installation or operating instructions,
alteration, abuse, accident, tampering, repair by anyone other than the Manufacturer,
external causes, and failure to perform required preventive maintenance. This
warranty also does not apply to any products, accessories, or attachments used in
conjunction with the Product, including batteries, which shall be covered solely by
their own warranties, if any. The Manufacturer shall not be liable for any damage or
loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, resulting from a malfunction of the Product due to products, accessories,
or attachments of others, including batteries, used in conjunction with the Product.
THE MANUFACTURER MAKES NO EXPRESS WARRANTIES EXCEPT THOSE
STATED IN THIS STATEMENT. THE MANUFACTURER DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE MANUFACTURER’S SOLE RESPONSIBILITY FOR
WARRANTY CLAIMS IS LIMITED TO REPAIR OR TO REPLACE AS SET FORTH
IN THIS STATEMENT.
The Manufacturer shall have no liability for any death, personal injury, property
damage, or other loss whether direct, indirect, incidental, consequential, or otherwise,
based on a claim that the Product failed to function. However, if the Manufacturer is
held liable, whether directly or indirectly, for any loss or damage arising under this
limited warranty or otherwise, regardless of cause or origin, the Manufacturer's
maximum liability shall be limited to the purchase price of the Product, which shall be
fixed as liquidated damages and not as a penalty, and shall be the complete and
exclusive liability of the Manufacturer.
damage, or other loss whether direct, indirect, incidental, consequential, or otherwise,
based on a claim that the Product failed to function. However, if the Manufacturer is
held liable, whether directly or indirectly, for any loss or damage arising under this
limited warranty or otherwise, regardless of cause or origin, the Manufacturer's
maximum liability shall be limited to the purchase price of the Product, which shall be
fixed as liquidated damages and not as a penalty, and shall be the complete and
exclusive liability of the Manufacturer.
The Manufacturer shall not, under any circumstances whatsoever, be liable for any
inaccuracy, error of judgment, default, or negligence of the Manufacturer, its
employees, officers, agents, or any other party, or of the purchaser or user, arising
from any assistance or communication of any kind regarding the configuration,
design, installation, or creation of security system involving the Product, that being
the responsibility of the purchaser or user.
The Manufacturer shall not, under any circumstances whatsoever, be liable for any
inaccuracy, error of judgment, default, or negligence of the Manufacturer, its
employees, officers, agents, or any other party, or of the purchaser or user, arising
from any assistance or communication of any kind regarding the configuration,
design, installation, or creation of security system involving the Product, that being
the responsibility of the purchaser or user.
If the Manufacturer is unable to make such repair or replacement, the Manufacturer’s
entire liability shall be limited to the cost of a reasonable substitute product.
If the Manufacturer is unable to make such repair or replacement, the Manufacturer’s
entire liability shall be limited to the cost of a reasonable substitute product.
The Manufacturer shall not be responsible for any dismantling, installation, reinstallation,
purchasing, shipping, insurance, or any similar charges.
The Manufacturer shall not be responsible for any dismantling, installation, reinstallation,
purchasing, shipping, insurance, or any similar charges.
The Manufacturer shall have no liability for any damages, including without limitation, any
direct, indirect, incidental, special, or consequential damages, expenses, costs, profits,
lost savings or earnings, or other damages arising out of the use of the Product or the
removal, installation, reinstallation, repair or replacement of the Product or any related
events. In the event that there is any liability against the Manufacturer, such liability shall
be limited to the purchase price of the Product which amount shall be fixed as liquidated
damages.
The Manufacturer shall have no liability for any damages, including without limitation, any
direct, indirect, incidental, special, or consequential damages, expenses, costs, profits,
lost savings or earnings, or other damages arising out of the use of the Product or the
removal, installation, reinstallation, repair or replacement of the Product or any related
events. In the event that there is any liability against the Manufacturer, such liability shall
be limited to the purchase price of the Product which amount shall be fixed as liquidated
damages.
The purchaser and user understand that this Product may be compromised or
circumvented by intentional acts; that the Product will not in all cases prevent death,
personal injury, property damage, or other loss resulting from burglary, robbery, fire or
other causes; and that the Product will not in all cases provide adequate warning or
protection. The purchaser and user also understand that a properly installed and
maintained alarm may reduce the risk of events such as burglary, robbery, and fire
without warning, but it is not insurance or a guarantee that such events will not occur or
that there will be no death, personal injury, property damage, or other loss as a result of
such events.
The purchaser and user understand that this Product may be compromised or
circumvented by intentional acts; that the Product will not in all cases prevent death,
personal injury, property damage, or other loss resulting from burglary, robbery, fire or
other causes; and that the Product will not in all cases provide adequate warning or
protection. The purchaser and user also understand that a properly installed and
maintained alarm may reduce the risk of events such as burglary, robbery, and fire
without warning, but it is not insurance or a guarantee that such events will not occur or
that there will be no death, personal injury, property damage, or other loss as a result of
such events.
By purchasing the Product, the purchaser and user shall defend, indemnify and hold the
Manufacturer, its officers, directors, affiliates, subsidiaries, agents, servants, employees,
and authorized representatives harmless from and against any and all claims, suits, costs,
damages, and judgments incurred, claimed, or sustained whether for death, personal
injury, property damage, or otherwise, because of or in any way related to the
configuration, design, installation, or creation of a security system involving the Product,
and the use, sale, distribution, and installation of the Product, including payment of any
and all attorney’s fees, costs, and expenses incurred as a result of any such events.
By purchasing the Product, the purchaser and user shall defend, indemnify and hold the
Manufacturer, its officers, directors, affiliates, subsidiaries, agents, servants, employees,
and authorized representatives harmless from and against any and all claims, suits, costs,
damages, and judgments incurred, claimed, or sustained whether for death, personal
injury, property damage, or otherwise, because of or in any way related to the
configuration, design, installation, or creation of a security system involving the Product,
and the use, sale, distribution, and installation of the Product, including payment of any
and all attorney’s fees, costs, and expenses incurred as a result of any such events.
The purchaser or user should follow the Product installation and operation instructions
and test the Product and the entire system at least once each week. For various reasons,
including but not limited to changes in environmental conditions, electric, electronic, or
electromagnetic disruptions, and tampering, the Product may not perform as expected.
The purchaser and user are advised to take all necessary precautions for the protection
and safety of persons and property.
The purchaser or user should follow the Product installation and operation instructions
and test the Product and the entire system at least once each week. For various reasons,
including but not limited to changes in environmental conditions, electric, electronic, or
electromagnetic disruptions, and tampering, the Product may not perform as expected.
The purchaser and user are advised to take all necessary precautions for the protection
and safety of persons and property.
This statement provides certain legal rights. Other rights may vary by state or country.
Under certain circumstances, some states or countries may not allow exclusion or
limitation of incidental or consequential damages or implied warranties, so the above
exclusions may not apply under those circumstances and in those states or countries.
This statement provides certain legal rights. Other rights may vary by state or country.
Under certain circumstances, some states or countries may not allow exclusion or
limitation of incidental or consequential damages or implied warranties, so the above
exclusions may not apply under those circumstances and in those states or countries.
The Manufacturer reserves the right to modify this statement at any time, in its sole
discretion without notice to any purchaser or user. However, this statement shall not be
modified or varied except by the Manufacturer in writing, and the Manufacturer does not
authorize any single individual to act on its behalf to modify or vary this statement.
The Manufacturer reserves the right to modify this statement at any time, in its sole
discretion without notice to any purchaser or user. However, this statement shall not be
modified or varied except by the Manufacturer in writing, and the Manufacturer does not
authorize any single individual to act on its behalf to modify or vary this statement.
Any questions about this statement should be directed to the Manufacturer.
Any questions about this statement should be directed to the Manufacturer.
8/96
8/96
Maufactured In Israel
VT World Headquarters
30 Habarzel Street
Tel Aviv 69710 Israel
Tel: +972 3 7681400
Fax: +972 3 7681415
Email: [email protected]
VTA (Visonic Technologies Americas)
65 West Dudley Town Road
Bloomfield, CT 06002
Tel: 860-242-0191 or 1800-223-0020
Fax: 860-242-8094
Email: [email protected]
VT UK (Visonic Technologies UK)
Fraser Road, Priory Business Park,
Bedford MK44 3WH. England
Tel: +44-870-730-0840
Fax: 44-870-730-0839
Email: [email protected]
Page 3 of 3
DE3650
discarding this product and not returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not
to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are