Spidem 10002516, Руководство по эксплуатации

Страница: 26 / 108

26
ADJUSTMENTS - COFFEE BREWING
5.2 Adjusting the Brewed Coffee
The machine allows you to adjust the amount of brewed
coffee according to your tastes and/or the size of your
coffee cup(s).
Each time you press and release the brew button (14)
or (15) the machine brews a pre-programmed amount
of coffee, which is different for each button. This amount
may be re-programmed to your taste. Each button may
be individually programmed for a speci
fi c brew setting.
As an example, the following procedure describes
the programming of button (14), which is normally
associated with espresso coffee.
• (Fig.10) - Place a cup beneath the dispensing
spout.
• (Fig.12) - Press and hold button (14); in this phase
the lights (19) and (20) blink alternately.
• (Fig.12) - When the amount of coffee in the cup
reaches the desired level, release button (14).
Button (14) is now programmed; each time it is pressed
and released, the machine will brew the same amount
of coffee just programmed.
5.3 Dispensing Spout Adjustment
(Fig.9) - The height of the dispensing spout (4) may be
adjusted to better fi t the dimensions of the cups that you
wish to use.
Manually move the dispensing spout up or down to
adjust its height.
The recommended positions are:
(Fig.10) - for use with small cups;
(Fig.11) - for use with large cups.
5.4 Stand-by
The machine is designed for energy saving.
After 60 minutes of inactivity, the machine turns off
automatically.
To turn the machine on again simply press the power
button (17); in this case the machine will go through the
rinse cycle only if the boiler is cold.
6 COFFEE BREWING
Note: Should the machine not brew coffee,
make sure that the water tank contains
water.
Before brewing coffee, make sure that the
green temperature ready light (19) is solid
(not blinking) and that the water tank and the coffee
bean hopper are full.
• (Fig.10 - Fig.11) - Place 1 or 2 cups beneath the
dispensing spout (4). You may adjust the height of
the dispensing spout to your cups.
• (Fig.12) - To brew the coffee simply press and release
button (14) for an espresso coffee, or (15) for a long
coffee.
• The brewing cycle is started: To brew 1 coffee press
the button just once; to brew 2 coffees press the
button twice in a row.
In this mode of operation, the machine
automatically grinds and doses the correct
amount of coffee. Brewing two coffees requires two
grinding cycles and two brewing cycles, carried out
automatically by the machine; this option is indicated
by the blinking double coffee light (20).
• After the prebrewing cycle, coffee begins to come out
of the dispensing spout (4).
• Coffee brewing stops automatically when the pre-
programmed level is reached; in any case it is
possible to interrupt coffee brewing by pressing the
button initially pressed.
The machine is adjusted to brew a real Italian
espresso. This feature may slightly lengthen
the brewing time, allowing the intense fl avour of the
coffee to develop fully.