05
SPEX ARM & THIGH SUPPORT USER MANUAL
6
WWW.SPEXSEATING.COM
To adjust the horizontal position of support pad, loosen the four
outer M6 fasteners with a 4mm Hex Key and adjust the hip guide to
the desired position.
Ensure all four fasteners are tightened up correctly once the support
pad is in position.
Replace the cover once complete.
3.
4.
5.
1.
Remove the cover if required.
To adjust the wheelchair width, height and angle, loosen the eight
M6 fasteners with a 5mm Hex Key, and adjust the plate as required.
To adjust the support pad height only, loosen the four M6 fasteners
with a 5mm Hex Key and adjust the hip guide to the desired height.
To achieve more offset of the thigh support, reverse the 8mm clamps
as shown.
If using the Swing Down Seat Pan Mounting Bracket, ensure the hip
guide bracket is fastened correctly using the countersunk fasteners.
Replace the cover once completed.
2.
3.
Axial Thigh support adjustment
4.
5.
