05
SPEX ARM & THIGH SUPPORT USER MANUAL
3
WWW.SPEXSEATING.COM
Warning
1. Hardware is shipped out disassembled and with brackets attached loosely. It is the installer’s responsibility to
ensure all hardware is installed correctly and tightened before using the wheelchair.
2. Installation and adjustment should be performed only by an authorized dealer or qualified therapist.
3. Spex products must not be modified or changed as this voids warranty
4. Only use genuine Spex accessories, components and hardware.
5. Never lift the wheelchair by the thigh or arm supports
6. Never use the Spex products if any hardware is missing, malfunctioning, or broken. Seek qualified assistance
with any repairs, replacements or adjustments.
7. Poorly fitted Spex products can aggravate posture problems and the overall safety of the user
8. The user must not put excessive force against the thigh or arm supports
9. When removing the thigh or arm supports, ensure the user is supported by a carer prior to avoid the user falling
from the wheelchair.
10. Be aware of the pinch points. Ensure all body parts are kept clear during these movements and adjustments.
11. The locking mechanism must be correctly locking at all times. If it stops locking do not use the equipment.
12. Spex arm and thigh supports must be used in conjunction with a stabilized pelvis with hip belt fitted
13. If the user has significant or forceful leaning to one side, a complete postural evaluation must be undertaken to
ascertain the correct wheelchair seating set up prior to installation.
14. Do not use Spex arm and thigh supports or mechanisms for purposes that are not designed for.
15. Care must be taken when undertaking a user transfer from the seating system. The user may fall from the wheel-
chair or injure themselves when supports are removed.
16. Never use the support without its cover. Care should be exercised near open flame or burning cigarettes. Using
the thigh support without its cover increases the risk of flammability and skin damage.
Check that the hardware is working correctly, if not you must replace immediately.
Medifab recommends that all fasteners be checked for wear, such as loose bolts or broken
components every 6 months. Loose fasteners should be retightened according to the
installation instructions. Contact your authorized Spex Seating supplier immediately to
replace any broken components. Do not continue to use the system after identifying
loose or broken components. The expected lifetime of the Arm & Thigh Support is 5 years.
Cleaning the hardware:
Hardware may be wiped clean with mild detergent and
water. Dry thoroughly after wiping.
Cleaning the Thigh support cover:
Machine wash. Do not bleach. Tumble dry (low
heat). Do not iron. Do not dry clean.
Cleaning the Arm support cover:
Wipe with mild detergent.
If you have any additional questions regarding cleaning procedures, please contact your
authorized Spex Seating dealer.
Maintenance & Cleaning
