9
Note!
Commands, such as configuring the SMS recipients, will be registered
by the lock only when it is active (i.e. not in sleeping mode). If the lock is
available, it should be unlocked in order to activate it; if the lock is in a
different location, it will activate within 24 hours with its "Alive" notification.
When the lock is active, in case of no response from the unit (up to 3
minutes from sending the message)- the command was not approved: the
command that was sent was not correct or full, and you should resend
the configuring command following the instructions. If there is no cellular
reception, the response will be sent once the lock will reach response.
*
See configuration examples on the next page