8
Send the SMS to the iWatcher LOCK's number (appears on the micro
SIM card attached to the kit)
.
Once the SMS will be sent, you'll receive a response from the unit to your
mobile phone, confirming the command- ;UNIT_ID,NUM=ACK;
You can define up to three SMS recipients to get the lock's notifications.
Configuring SMS Recipients
Write an SMS from any mobile phone with the following command:
;<LOCK>NUM=,subscriber1,subscriber2,subscriber3,;
Instead of - subscriber3,subscriber2,subscriber1- enter the mobile numbers to
which you want the lock to alert.
Note not to add spaces between the numbers and make sure to write the full
command, including all 4 commas (see examples on the next page).
The mobile number should begin with a + followed by the country code.