13
Sperian Fall Protection Deutschland GmbH & Co. KG, Seligenweg 10, D-95028 Hof, T el. +49 9281 8302-0, Fax +49 9281 3626,
[email protected], www.fall-protection.com
Lifting
Device usage
Test interval
Revision inspection
Test interval
Rope
Ma ximum lifting power 280 kg
Ma ximum lift 3.5 m
10 m
10 m
All the limit values specified for test cycles are applicable only for devices and ropes
which do not have any signs of wear. If there are visible / noticeable signs of wear on
the rope or the device which do not necessarily lead to absolute retraction of the
device, the test intervals must be shortened or the device must be inspected
immediately and repaired or scrapped if necessary.
The device must be tested after every training session and one day before the next
usage, irrespective of whether or not the above-mentioned limit values for the test
cycle have been reached during the previous training session.
The test lists of the manufacturer for conducting the inspection as well as the
corresponding operating manuals must be adhered to.
The instructions and the test instructions of the manufacturer must be adhered to.
The available descent energy and the conducted revision inspections must be
entered in the attached list for documentation. Descent and lift should be
differentiated between in this case.
Authorisation for conducting trainings and exercises.
Application trainings must be conducted only by persons who have been trained
(having a certificate / training certificate) by the manufacturer or a direct
representative to become a trainer.
Exercises must be conducted only under the supervision of competent persons who
have participated (having a certificate / training certificate) in at least one training
application by the manufacturer or an authorised person.
The manufacturer or a direct representative of the manufacturer trains the trainers.
The training to become a trainer also includes the training to become an expert. The
trained trainer is authorised to conduct application trainings as well as expert
trainings. Only the trainers authorised by the manufacturer may conduct trainings for
trainers.
