5
• Press and release the Power button to turn the meter on/off.
• Hold the button down for 2 seconds to enter or exit setup mode.
• Press and release HOLD to freeze the current reading. Press
again to unfreeze readings.
• Hold the button down for 2 seconds to view Minimum and
Maximum values. Hold down again to return to normal mode.
• In average mode press to record data or start timed recording.
• In setup mode press to enter data settings.
• With the meter on, press Lmode to select a lower display of
air temperature, air volume, WBT (Wet Bulb Temperature), or
DP (Dew Point).
• In average mode, press to select they type of average you
seek, press again to return to normal mode.
• In setup mode, press to select category or increase value.
KEY PAD
