11
SETUP & CALIBRATION
In normal mode press power “Set” for 2 seconds to enter setup
mode. Press again for 2 seconds to exit setup mode. Use the up
and down arrows to select among the following options:
P1.0 Unit selection
P2.0 Area input
P3.0 RH offset
P4.0 Pressure compensation.
P1.0 Unit Selection
1. Press enter to enter unit selection mode.
2. Press & arrow to switch from metric to imperial units.
3. Press enter to return to P1.0 then press the up arrow to scroll to P2.0.
P2.0 Area input
1. Press enter and the display will show “99999” with the first
digit flashing.
