8
6. Remove the battery body and gently pull the four-wire plug
from the circuit board.
7. Plug the new battery into the pins of the exposed circuit
board. Ensure the black wires align with the negative (-)
pins and the red wires align with the positive (+) pins.
8. Slide the rubber piece back onto the handle until it
clicks twice.
9. Charge the camera for a minimum of two hours.
Power On and Off
1. Press and hold
POWER
to turn the camera
on
.
2. The camera may take up to 5 seconds to turn on. This
is normal.
3. Press and hold
POWER
until “Power off” displays on
the screen. The camera will turn off after a five second
count-down.
SETTING THE DATE AND TIME
1. Turn the camera
on
.
2. Press
MENU
.
3. Press the
DOWN
arrow to highlight
Settings
.
4. Press the
RIGHT
arrow to expand
Settings
.
5. Press
DOWN
to highlight
Time format
.
6. Press the
RIGHT
arrow to expand the
Time format
.
7. Use the
UP
and
DOWN
arrows to highlight your preferred
time format. The camera supports military (24 hr) or AM/PM.
8. Press
SELECT
to confirm your choice.
9. Press
LEFT
to exit to the previous screen.
10. Press
DOWN
to highlight
Set Time
.
11. Press the
RIGHT
arrow to expand
Set Time
.
