23
Sampling and Recording in Schedule Mode
1. Disconnect the USB cable from the computer and meter.
Place the meter in the desired location for sampling.
2. At the scheduled start date and time, the datalogger will
automatically begin recording data. The recording icon will
display.
3. The datalogger will record up to 32,000 data points. Once
the scheduled stop date and time are reached, recording
will stop.
Sampling and Recording in Real Time Start Mode
1. The USB cable should remain connected to the computer
and meter. The green icon at the bottom left of the Data
Logger Monitor Screen will flash to indicate that the logger
is recording. The recording icon will display.
2. The datalogger will record up to 32,000 data points. Click
on “Stop” on the lower right of the Data Logger Monitor
Screen to stop recording.
Note…
If HCHO readings display “-49” in real time mode there has
been a power loss during recording or the sensor is not yet
warmed up.
