manualshive.com logo in svg

Sper scientific 800052, Инструкция по эксплуатации

Поделиться
Скачать
Sper scientific 800052 Скачать руководство пользователя страница 21

21

a.  Adjust the ▲ or ▼ indicators to specify the number of 

sample points, in thousands, from 1000 ~ 32,000.

b.  Adjust the ▲ or ▼ indicators to toggle between units: °C or °F.
c.  The fields for the start date and time and the stop date and 

time will be automatically populated with default values. 

Click on any of these fields and use the computer keyboard 

to make changes as desired.

d.  Select “Ok” to save the settings and exit the menu, or 

“Cancel” to exit without saving the new settings.

Setting Real Time Start Mode

This option is used when the meter will remain connected to 

the computer. 

a.  Adjust the ▲ or ▼ indicators to specify the number of 

sample points, in thousands, from 1000 ~ 32,000.

b.  Adjust the ▲ or ▼ indicators to toggle between units: °C or °F.

c.  Select “Ok” to save the settings and exit the menu, or 

“Cancel” to exit without saving the new settings.

DATA SAMPLING AND RECORDING

The meter should be powered by both batteries and the AC 

adaptor during datalogging to prevent possible data loss due 

to power interruption.

Note…

 

When the meter is disconnected from the computer, a “No 

port found” error message will display. This will 

not affect the 

data sampling and recording. Click “OK” to continue.

Содержание 800052





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды