Spencer 170 NXT Скачать руководство пользователя страница 22

22

 

Please note that you must do the cleaning as described in this manual and verify functionality before and after each use. Spencer Italia S.r.l. 
declines any responsibility for the improper functioning or damages caused to the patient or user by the use of devices not subject to routine 
maintenance and will void the warranty and the compliance to the Medical Device Directive 93/42/CEE. 

 
Use  only  accessories/original  spare  parts  approved  by  Spencer  Italia  S.r.l.,  otherwise  we  will  accept  no  responsibility  for  the  incorrect 
functioning and/or damage caused by the use of any device which has not been repaired, or certified on expiry date by the manufacturer or 
by one of the manufacturer's authorised service centres. Warranty will be considered void in compliance with the Medical Device Directive 
93/42/EEC. 

12.3

 

Periodic maintenance 

The device must be serviced by the manufacturer or by an authorised centre every year.  

If the correct revision is not carried out, the CE branding will no longer be considered valid as the product will no longer be compliant with 
the  93/42/CE  Directive  for  Medical  Devices  and  consequently  it  is  no  longer  compliant  with  the  safety  standards  declared  by  the 
manufacturer at time of purchase.  
Spencer Italia S.r.l. will take no responsibility the incorrect functioning or any damage caused  by  a device  that  has  not undergone regular 
revision. For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have to underline that a 
report regarding all operations carried out must be requested. This will permit both Spencer Italia S.r.l. and the end user to keep a log book 
regarding the operations carried out on the device. 

12.4

 

EXTRAORDINARY maintenance 

Only the manufacturer or centres with written authorisation are authorised to complete any special servicing operations. 

For any operations that are  not  carried out  directly by the manufacturer but by an authorised centre, we have to underline that  a report 
regarding  all  operations  carried  out  must  be  requested.  This  will  permit  both  Spencer  Italia  S.r.l.  and  the  end  user  to  keep  a  log  book 
regarding the operations carried out on the device. 

The final user is authorised to replace only the spare parts indicated in the paragraph 15. 

12.5

 

Life span 

The device, if used as indicated in the following instruction manual, has an average life span of 5 years 

The life span can be expanded only following a general revision of the product that must be carried out by the manufacturer or by a centre 
authorised by the manufacturer. Spencer Italia S.r.l. will accept no responsibility for the incorrect functioning and/or damage caused by the 
use of any device which has not been repaired, or certified on expiry date by the manufacturer or by one of the manufacturer's authorised 
service centres, making void both the guarantee and the conformity to the Medical Devices Directive 93/42/CEE. 
Spencer Italia S.r.l. will take no responsibility the incorrect functioning or any damage caused  by  a device  that  has  not undergone regular 
revision. For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have to underline that a 
report regarding all operations carried out must be requested. This will permit both Spencer Italia S.r.l. and the end user to keep a log book 
regarding the operations carried out on the device. 
 

 

Содержание 170 NXT


























Отзывы: