Spelso L, Руководство по эксплуатации, Страница: 7 / 11

Before connecting the gateway, switch off PIN code protection for the
SIM card.
Power adapter is intended for a 220 V network.
Normal functioning of the GSM Gateway is guaranteed only if the factory
parts are used. The usage of other parts may lead to gateway failure or damage.
For example, if a standard small aerial is used in a low signal area, there might be
poor signal reception or noise in the sound.
Attention! Before inserting or extracting the SIM card, switch off the
gateway to avoid causing SIM card or gateway malfunction.
Attention! If the power source needs to be replaced, stabilized DC power
units, voltage 5 V, current no less than 1 A can be used. Polarity observance is
required(central connection outlet should be marked with "+").
6.2. Outgoing call
1. Lift the receiver and wait for a continuous tone.
2. Dial the user's number.
– For speed dialing press the # key after the last number.
– To dial a preprogrammed number enter "cell number #".
– To redial enter "* #".
– To dial the last incoming call enter "* * #".
– If the autodial function is enabled, after the receiver is lifted, the
countdown of the programmed time begins. Dialing any number during the
allowed pause cancels this mode and makes a standard outgoing call.
3. If the call receiver is unavailable, you will hear a call signal.
4. To end a call, hang up the receiver.
6.3. Gateway setup
All gateway settings by default have values that satisfy the requirements
of most users.
Settings can be changed with the telephone set to tone mode.
1. Lift the receiver and wait for a continuous tone.
2. Dial "*505*505#".
3. After dialing, you will arrive at the gateway settings voice
menu. (Table 6.1).
4. Gateway numerical values are set using the units of measurement
specified in the settings descriptions. To confirm a setting press "#". The settings
are automatically saved after exiting the settings menu.
5. To move up one level and to cancel press "*". To exit the settings
mode, hang up the receiver and press "*" in the main menu.
Table 6.1 Gateway settings main menu
Setting code Setting description
0 Telephone line settings menu
1 GSM channel settings menu
2 Speed dial programming menu
9 Settings reset
6