Spektrum NX10 Скачать руководство пользователя

Страница: 40 / 54

SPEKTRUM NX10 • TRANSMITTER INSTRUCTION MANUAL

The possible servo reversing options for a delta wing model are:

TIP:

If you test all servo reversing options and the control

surfaces do not move in the correct direction, change the

Elevon wing type in the System Setup list from Elevon A to

Elevon B.

Aileron

Elevator

Normal

Reverse

Normal

Reverse

Normal

Right
Rudder

Left
Rudder

Up
Elevator

Down
Elevator

Left
Aileron

Right
Aileron

The Flap System menu option enables flap programming as well

as elevator mixing. You must select a flap-enabled wing type in

Aircraft Type or the Flap System menu does not appear.

To activate the Flap System:

1. Access the System Setup list and select Aircraft Type.

2. Select a flap-enabled wing type and exit the System Setup list.

3. Access the Function List from the Main Screen and select Flap

System.

4. Select Inhibit and scroll to the switch or lever you wish to use

to control the flap channel.

5. Assign the Flap travel values and any desired Elevator mixing.

6. Select a Flap speed, if desired. Norm (default) does not have a

delay. Flap speed options range from 0.1s to 30 seconds.

Rudder to Aileron/Elevator

Rudder to Aileron/Elevator mixing corrects coupling in knife edge

flight.

• Add Elevator mixing if the aircraft pitches toward the landing

gear or canopy

• Add Aileron mixing if the aircraft rolls in knife edge flight

Aileron to Rudder

Use Aileron to Rudder mixing to overcome adverse yaw

characteristics with certain types of aircraft (such as high-wing

aircraft).

Elevator to Flap

Elevator to Flap mixing enables Flap movement when the Elevator

stick moves. Use Elevator to Flap mixing to add the spoileron

function to 3D aerobatic aircraft. This mix is available when a flap

or dual aileron wing type is selected.

Elevon Servo Control

Flap System

ACRO Mixing

Содержание NX10























































Результаты поиска

Содержание NX10

Отзывы:

Похожие инструкции для NX10

Бренды по названию

Популярные бренды

Spektrum NX10, Инструкция по эксплуатации

Результаты поиска

Содержание NX10

Отзывы:

Похожие инструкции для NX10

Бренды по названию

Популярные бренды