background image

EN

27

Horizon Hobby, LLC hereby declares that this product is in 

 

compliance with the essential requirements and other relevant provisions 
of the RED Directive. 

A copy of the EU Declaration of Conformity is available online at: 

 

http://www.horizonhobby.com/content/support-render-compliance

Frequency Band: 2402 - 2478 MHz
Max EIRP: 20dBm

Instructions for Disposal of WEEE by Users in the European Union

This product must not be disposed of with other waste. Instead, it is the 

user’s responsibility to dispose of their waste equipment by handing it over 

to a designated collection point for the recycling of waste electrical and 

electronic equipment. The separate collection and recycling of your waste 

equipment at the time of disposal will help to conserve natural resources and ensure 

that it is recycled in a manner that protects human health and the environment. For 

more information about where you can drop off your waste equipment for recycling, 
please contact your local city office, your household waste disposal service or where 

you purchased the product.

Compliance Information for the European Union

IC Information

IC: 6157A-SPMAR630
CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada license-exempt RSS standard(s). 

Operation is subject to the following two conditions: (1) this device may not 

cause interference, and (2) this device must accept any interference, Including 

interference that may cause undesired operation of the device.

Cetappareilestconforme à la norme RSS d'Industrie Canada. Son 
fonctionnementestsujet aux deux conditions suivantes:

(1) ledispositif ne doit pas produire de brouillagepré judiciable, et
(2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage 

susceptible de provoquer un fonctionnementindé sirable. 

Dé clarationd'exposition aux radiations:
Ceté quipementestconforme aux limitesd'exposition aux rayonnements IC é tablies pour 

unenvironnement non contrô lé. Ceté quipementdoitê treinstallé etutilisé avec un minimum de 20cm 
de distance entre la source de rayonnement et votre corps.

Содержание AR630





























Отзывы: