CJ-200E
4
Model CJ-200E Operating and Maintenance Manual
GUIDE TO GRAPHICAL SYMBOLS
Read all instructions
Eye protection required
High Pressure Output. Direct spray
away from persons, pets, equipment,
and electrical outlets.
Grounding Information
Ground Fault Circuit Interrupter Protection
The COILJET
®
is provided with a ground fault circuit interrupter (GFCI) built into the power
supply cord. This device provides additional protection from the risk of electric shock. Should
replacement of the plug or cord become necessary, use only identical replacement parts that
include GFCI protection.
Extension Cords: Use only 3-wire extension cords that have 3-prong grounding-type plugs and
3-pole cord connectors that accept the plug from the product. Use only extension cords that
are intended for outdoor use. These extension cords are identified by a marking, “Acceptable
for use with outdoor appliances; store indoors while not in use.” Use only extension cords having
an electrical rating not less than the rating of the products. Do not use damaged extension
cords. Examine extension cord before using and replace if damaged. Extension cords are not
protected by the GFCI. A GFCI must be present on the power cord or a GFCI must be present
in the outlet.
Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away
from heat and sharp edges. Always disconnect the extension cord from the receptacle before
disconnecting the product from the extension cord.
WARNING: To reduce the risk of electrocution keep all connections dry and off the ground. Do
not touch plug with wet hand.
Wear proper clothing:
Protect yourself! Wear rubber gloves, rubber boots, etc. Wear eye
and face protection, goggles or face-shield. Coil cleaning chemicals may cause injuries
to the eyes and skin. Protect yourself from direct skin contact with the chemicals found in
this environment. Remember that water splatter can send these chemicals toward you, so,
again, protect yourself.
Environment:
Make sure that there is adequate ventilation into the work area. Do not operate
machine in areas where flammable gases or liquids are present.
Changing hoses and/or nozzles
: ALWAYS turn machine off when changing hoses or nozzles.
Never hold onto nozzle or point it at anyone with machine turned on. High-pressure water
streams can cause serious bodily injury.
Job completion:
Always turn machine off before disconnecting water supply. Running a water
pump “dry” may cause serious damage.
Maintenance:
Keep machine clean and dry to maximize performance and longevity. Follow
maintenance outlined in this manual, such as checking for weak spots, leaks, slices or cuts in
hose, replace nozzles when worn. Keep antifreeze in hose & pump when storing in freezing
temperatures. Additional maintenance details follow in this manual. If the machine does not
operate properly or has been damaged or exposed to water, call the factory for assistance —
do not try to service the unit yourself.
