Cunningham
The cunningham is only used in an Enterprise when sailing upwind in 15 knots and above. In these
conditions it can be used to remove some of the creases that are appearing on the main luff. Do not
remove the creases completely however and do not use the cunningham downwind. The cunningham
should never be pulled on bar tight.
Outhaul
When sailing upwind in all conditions except for a drifter the outhaul should be pulled out to the black
band. In drifting conditions it can be eased ¼ inch. On the reaches the outhaul should be eased 1
1
/
2
– 2
inches where as on a run it should only be eased ½ inch to keep maximum sail area to the wind.
If you have any questions or problems please do not hesitate to contact Speed Sails at (0)1922 455503.
