background image

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT

5

M414881 (EN)

Installation/Operation Supplement

Safety Information

Save These Instructions

Important Safety Instructions

1. Read all instructions before using the tumbler.

2. Refer to the 

GROUNDING INSTRUCTIONS

 

for the proper grounding of the tumbler.

3. Do not dry articles that have been previously 

cleaned in, washed in, soaked in, or spotted with 
gasoline, dry-cleaning solvents, or other 
flammable or explosive substances, as they give 
off vapors that could ignite or explode.

4. Do not allow children to play on or in the 

tumbler. This appliance is not intended for use by 
young children or infirm persons without 
supervision. Young children should be 
supervised to ensure that they do not play with 
the appliance.

5. Before the tumbler is removed from service or 

discarded, remove the door to the drying 
compartment and the door to the lint 
compartment.

6. Do not reach into the tumbler if the cylinder is 

revolving.

7. Do not install or store the tumbler where it will 

be exposed to water and/or weather.

8. Do not tamper with the controls.

9. Do not repair or replace any part of the tumbler, 

or attempt any servicing unless specifically 
recommended in the user-maintenance 
instructions or in published user-repair 
instructions that you understand and have the 
skills to carry out.

10. Do not use fabric softeners or products to 

eliminate static unless recommended by the 
manufacturer of the fabric softener or product.

11. To reduce the risk of fire, 

DO NOT DRY

 plastics 

or articles containing foam rubber or similarly 
textured rubberlike materials.

12. Always clean the lint filter daily.

13. Keep area around the exhaust opening and 

adjacent surrounding area free from the 
accumulation of lint, dust and dirt.

14. The interior of the tumbler and the exhaust duct 

should be cleaned periodically by qualified 
service personnel.

15. If not installed, operated and maintained in 

accordance with the manufacturer’s instructions 
or if there is damage to or mishandling of this 
product’s components, use of this product could 
expose you to substances in the fuel or from fuel 
combustion which can cause death or serious 
illness and which are known to the State of 
California to cause cancer, birth defects or other 
reproductive harm.

16. Tumbler will not operate with the loading door 

open. 

DO NOT

 bypass the door safety switch to 

permit the tumbler to operate with the door open. 
The tumbler will stop tumbling when the door is 
opened. Do not use the tumbler if it does not stop 
tumbling when the door is opened or starts 
tumbling without pressing or turning the START 
mechanism. Remove the tumbler from use and 
call for service. 

17. Tumbler will not operate with lint panel open. 

DO NOT

 bypass lint panel safety switch to 

permit the tumbler to operate with the lint panel 
open.

18. Do not put articles soiled with vegetable or cooking 

oil in the tumbler, as these oils may not be 
removed during washing. Due to the remaining 
oil, the fabric may catch on fire by itself.

19. To reduce the risk of fire, 

DO NOT

 put clothes 

which have traces of any flammable substances 
such as machine oil, flammable chemicals, 
thinner, etc. or anything containing wax or 
chemicals such as in mops and cleaning cloths, or 
anything dry-cleaned at home with dry-cleaning 
solvent in the tumbler.

20. Use the tumbler only for its intended purpose, 

drying fabrics.

21.

ALWAYS

 disconnect and lockout the electrical 

power to the tumbler before servicing. 
Disconnect power by shutting off appropriate 
breaker or fuse.

Hazardous Voltage. Can cause shock, burn 
or cause death. Allow machine power to 
remain off for two minutes prior to working 
in and around AC inverter drive.

W359

WARNING

Содержание Drying Tumblers TMB1268C































Отзывы: