Speech Technology Gnome-2M, Руководство пользователя

Страница: 18 / 34

CHAPTER 6. DEVICE OPERATION
Figure 6.6: Power supply module with batteries
6.7.2 External power supply
The power supply adapter is usually used in steady-state conditions, e.g. during joint operation of
the voice recorder and PC or for playing sound recordings. Power supply is plugged in the respective
voice recorder connection jack (Fig. 6.1).
Important! Don’t plug in the power supply if the device is in the recording mode. It can
cause the voice recorder to turn off and the recording will be interrupted.
6.8 Memory cards
Detachable permanent memory cards Compact Flash I are used for data storage. To set the card,
position the voice recorder and memory card as shown in Fig. 6.7. Then pull the ejector (Fig. 6.1,
p. 4) out till it stops. Place the CF so that its ledge (Fig. 6.7, p. 2) and guide slits (Fig. 6.7, p. 3) are
turned upwards and insert it into the recorder as shown in Fig. 6.7.
Important!
You should never force the CF into its place under any circumstances. If the card does not
seem to fit, ensure that it is properly placed.
To remove the CF, pull the ejector (Fig. 6.1, p. 4) and manually remove the card. Then push the
ejector back to its initial position.
Attention! Don’t try to remove the ejector from the voice recorder or pull it out more than
4 mm, as it may cause recorder’s failure.
18