Speech Technology Gnome-2M, Руководство пользователя

Страница: 17 / 34

6.6. CONNECTING THE HEADPHONES
Figure 6.4: PC connection cable
6.6 Connecting the headphones
Headphones can be connected to the voice recorder either using the headphone jack provided on
the remote control unit (Fig. 6.3, 6) or with a headphones adaptor included in the delivery set ( Fig.
6.5) and connectable directly to the voice recorder (Fig. 6.1, 7).
Figure 6.5: Headphones adaptor
Attention!
When connecting external microphones or a PC connection cable to the voice recorder,
make sure that the inscription on the plug is directed opposite to the panel containing the
status indicator LED and the erase button. When disconnecting a cable from the voice
recorder, first press the PUSH button at the plug and then pull out the plug.
6.7 Power supply
6.7.1 Power supply elements. Setting up. Operating time
The voice recorder power supply consists of two alkaline LR03 batteries (AAA type). Each
battery has 1.5 V voltage.
It is not recommended to use accumulators, saline batteries or unknown manufacturer’s batteries.
To change batteries, switch off the recorder and remove the power supply module cover plate, as
shown in Fig. 6.6). Then remove old batteries and insert new ones.
Batteries lifetime is indicated on the LCD panel of the voice recorder. If you use external power
supply, recording length is limited only by the Flash Card capacity.
Important!
- Don’t use old or damaged batteries.
- Don’t mix old batteries with new ones.
- Don’t use different types of batteries.
- Don’t try to recharge old batteries.
17