Spedal C326, Руководство пользователя

Страница: 7 / 9

- 05 -
Time-Lapse Recording is not suitable for monitoring purposes while driving.
Video Recording
FUNCTION INTRODUCTION
● Loop Recording
The dashcam will start video recording automatically after powering on. When the TF card storage is full,
old footages will be replaced by new ones automatically if the old ones are not locked. You can choose 3
/ 5 / 10 Minutes for the video length.
● Motion Detection Recording
Turn on “Motion Detection” in “Setup” menu. This function is designed to monitor, when you have parked
and left your vehicle but still requires a continuous power supply. It will record video each time motion is
detected.
● Time-Lapse Recording
Turn on “Time-Lapse Recording” in “Setup” menu. This function will capture ten photos per second to
make a video played at a high-quality 10fps frame rate. The videos will be saved in the “Video File” folder.
You can enter the playlist or “Setup” menu (or disconnect power) to end emergency recording
mode.
Emergency Recording
● Manual File Backup
Press to back up the current file so that it will not be overwritten. An icon will appear in the
top-left of the screen to indicate a protected emergency recording is in progress.
● Auto File Backup
Once the G-sensor is activated by a sudden collision, the dashcam will automatically start recording and
protect it from being overwritten. You can adjust the G-sensor sensitivity in the “Setup” menu.
Audio Recording
Turn on / off audio recording by long-pressing when in video recording mode (or by turning on
“Audio Recording” in the “Setup” menu). Details from the recorded sound may provide useful information,
such as possible hazards that may develop, especially when off-camera.