4
Installation
Assembly —
Continued
1.
Attach the paddle antenna to the top of the bracket by twist-
ing it into the SMA connector. Tighten finger tight so that the
antenna does not unscrew. See images below.
2.
For Weather and ET Stations: Attach the anemometer arm to
the front of the bracket using the provided screws (see image
on facing page). The arm should extend parallel to the brack-
et (see images above). Attach the wind cups and wind vane
using the included Allen wrench.
Temperature Alert Station
ET Station. The Weather Station and Rain Station have the
same design with different sensor sets.
