Spectrum WatchDog 3000 Series, Руководство по эксплуатации продукта

Страница: 10 / 16

10
SpecConnect
1. Open a web browser and navigate to www.specconnect.net.
Log in with credentials.
2. Click on the “ Equipment ” tab on
the left side of the screen.
3. Navigate to the device on the equipment page and click the
“ Configure ” button.
4. Set the time zone.
5. If an additional sensor is
connected to the “ EXT ”
port, configure it in Port D.
6. Make any other desired
changes including station
or sensor .
7. Once complete, tap the
save button in the bottom
left corner.
8. The device is now set up,
except that North needs to
be set for the wind vane.
This must be done at the
installation site using a
Bluetooth connection to
the WatchDog Mobile app
on a smartphone (see
page 9).
Configuration