Spectrum Swim-Lift Gallatin WP400, Руководство пользователя

Страница: 10 / 14

3.
A lock pin is attached to the top of the cylinder to lock the chair in the fully raised position or
rotated 180° over the pool. Push the pin through the piston rod (lower hole) to lock the chair in the
fully raised position when the lift is not in use and/or when the water supply is turned off. Use the
180° rotated lock pin hole (upper hole) to lock the chair in place when removing the lift from the
anchors.
4.
Keep other swimmers and children away from the lift at all times. Remove the lift from poolside
when not in use if possible. A cover is available from Spectrum Products® to aid in preventing
unauthorized use of the lift.
5.
To drain the water from the lift for storage: disconnect the water source, turn the control valve to
down, push the chair down, turn the control valve to up, and push the chair back up. Repeating this
step is necessary to get all of the water removed. This process will force the water from the
cylinder, valve and hoses.
Care and Maintenance
The Swim-Lift® Gallatin is virtually maintenance free since the drive component (water) is self-
lubricating. Providing it is installed correctly, the lift will furnish you with many years of trouble-free
use.
To ensure safe and dependable use, periodically disengage the deck anchors and lubricate the acme
thread nut with a small amount of Vaseline. Also, check that the inside bolt is tight. If it is loose or
corroded, replace it immediately. Do not operate the lift until the bolt is replaced.
Maintaining Stainless Steel Products
Stainless steel, when properly maintained, is attractive, strong and durable. Stainless steel is superior
to carbon steel in its ability to resist corrosion when it is placed in hostile environments, e.g. indoor
aquatic facilities. Stainless steel, however, is not totally stain or rust proof. It is essential that proper
fabrication techniques and post fabrication treatment be performed in the manufacturing process, along
with periodic product maintenance by the end user, to ensure a beautiful and functional stainless steel
product.
It is of utmost importance to properly maintain your stainless steel product! A technique known
as passivation can be used to provide a chemically clean surface that will aid in the reformation of the
surface oxide layer and can dissolve any free-iron contamination or rust spots on the surface of the
stainless steel. Passivation is accomplished by periodic cleaning with SpectraClean™ (part number
202050) whenever the metal is dirty in order to restore its original appearance.
Order SpectraClean™ Field Stainless Steel Cleaning and Passivation Kit, part number 202050 from
your Spectrum Products Dealer or order online at
www.spectrumproducts.com .