Spectrum Quad Plex, Руководство пользователя, Страница: 23 / 62

350-12336-01 – updated April, 2020 QuadPlex User Guide 13
C H A P T E R 2
I n st a l l a t i o n
RG B
6. Connect the input, output, network, and power cables to the mounted unit(s), as described in
“Connections (Standalone Unit)” on page 14 .
2.1.2 VESA Mount
You can mount
QuadPlex
units on standard 75 mm, 100 mm, or 200 mm VESA mounts, or on the
back of devices with VESA-compliant mounting holes. The optional angle bracket kit (p/n 920
12325) includes two (2) brackets and mounting screws.
75 - 10 0 M M
To mount a
QuadPlex
unit on a 75 or 100 mm
mounting space:
1. Attach the brackets to the VESA mount
using two (2) M4 screws (sold separately)
inserted through a slot in each bracket, as
shown in Figure 2-2 . Do not over-tighten.
2. Use four (4) M3 x 6 flat-head screws
(included in your kit) to attach the
QuadPlex
unit to the brackets. Do not over-tighten.
Figure 2-2 75 or 100 mm VESA Mount
20 0 M M
To mount a QuadPlex unit on a 200 mm
mounting space:
1. Use four (4) M3 x 6 flat-head screws
(included in your kit) to attach the QuadPlex
unit to the brackets with the angles facing
away from each other, as shown in
Figure 2-3 . Do not over-tighten.
2. Attach the brackets to the VESA mount
using two (2) M4 screws (sold separately)
inserted through a slot in each bracket. Do
not over-tighten.
Figure 2-3 200 mm VESA Mount
No t e
Each VESA mount can only accommodate a single device. If you use a VESA mount for a
QuadPlex
unit, that mount cannot be used to attach a second device.