Spectrum Mopit mini, Руководство оператора и сервисное руководство, Страница: 19 / 38

Page 19
TROUBLESHOOTING
Not Getting Any Water
1. Make sure the brush and solution switches are both on
2. Check to make sure the manual water valve (pg 7) is turned on.
3. Check to make sure there is water in the fresh water tank.
4. Check to make sure you are getting water past the fresh water fil-
ter. Pull off the tubing past the filter and open the manual water
valve to make sure water comes out.
5. Check to make sure that the solenoid “clicks when you turn on the
brush motor and flip the solution switch on and off.
6. Replace the drip tube. See page 17
7. Call Spectrum for additional troubleshooting
Mopit Batteries Not Charging
1. Check to make sure that the charger power cord is plugged into the
charger and is in good condition and that your power outlet is working.
2. Call Spectrum for troubleshooting. Also see page 16 on charger replace-
ment.
Mopit Is Leaving Black Marks
The most common cause is not getting water onto the floor. Black
marks can also be caused by missing or worn squeegee wheels. See
above for how to fix water issues and page 9 for squeegee replacement.
Mopit Machine Smells When I Use It
The Mopit will stink when the recovery tank is not cleaned out regular-
ly. See page 13 for how to clean the tank.
Mopit Machine Is Shocking Me When In Use
Static shocks happen when no water is getting to the floor. The static
electricity from the spinning brush causes the static shock. To fix this
issue follow page 19 on not getting any water.