manualshive.com logo in svg

Spectrum Freedom XRS Elite, Руководство пользователя

Поделиться
Скачать
Spectrum Freedom XRS Elite Скачать руководство пользователя страница 14

See spectrumfurniture.com for the latest available flat 

panel monitor arms, and rack-mount accessories.

Overbridge Insert Panel Blank - 96504

Overbridge Insert Panel with cutouts - 96504mod

•  For overbridge version only

•  Contact Spectrum to specify cutout size(s) and location(s)

•  Overbridge not available separately

•  Includes two 2” grommets with covers

•  Customer-installed

Cove Power Module - 99044

•  Two power receptacles

•  Two USB charge ports (not data-compatible)

•  Thumbscrew clamps

•  Requires worksurface cutout

•  ETL listed

•  Customer-installed

Cutout required:

5.25”W [13.3 cm] x 2”D [5.1 cm]

(mounts to surface thicknesses up to 1.5”)

Power cord:

9’ [274 cm] with 90° flat plug with 45° rotation

Power receptacles: 12A, 120 VAC spill-resistant

USB charging ports: 2.1A (10.5W)

Dimensions:

6”W [15.2 cm] x 2.5”D [6.35 cm] x 3.18”H [8.1 cm]

Unit weight:

2.3 lb [1 kg]

0118857 Page 14 of 18

Содержание Freedom XRS Elite



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды