Spectrum DX6R Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 42

Spectrum DX6R Скачать руководство пользователя страница 40

40

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Notice: Modifications to this product will void the user’s authority to
operate this equipment.

This product contains a radio transmitter with wireless technology which has
been tested and found to be compliant with the applicable regulations governing
a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, Including
interference that may cause undesired operation of the device.

fCC INfORMATION

IC INfORMATION

«
...
38
39
40
41
42
»

Содержание DX6R











































Отзывы:

Нет отзывов