0117128R5 Page 6 of 10
Flat panel monitor
Zip tie cords to
secure to desk
Zip tie monitor,
keyboard, and
mouse cords here
Loom clip
Monitor, keyboard
and mouse cords
to CPU
CPU
Wire loom
CPU cords exit loom here. Zip
tie around cords and loom to
prevent cords from backing out
Loom clip
Zip tie here to secure
CPU / Ethernet cords to
bottom of wiring tray
Power strip
(not included)
120VAC
Power cords
To wall outlet
4. With the loom removed, feed the monitor, keyboard, and mouse cords through the sliced opening of the loom to the bottom of
the desk as shown.
Figure 6D
.
5. Split the CPU wires out of loom approximately 3/4 of the way down the loom and plug into the CPU.
6. Reattach the loom with the clips while providing enough slack in the loom to allow the monitor column to fully extend and retract.
7.
Secure the CPU cords to the bottom of the loom by attaching a zip tie around the loom directly above where the CPU cords exit
the loom. This will prevent the cords from backing out.
Figure 6D
.
8.
Secure the CPU / Ethernet cords to the bottom of the wiring tray with a zip tie.
9.
Use zip ties to secure additional cords as needed.
Figure 6D
Back View
