0117128R5 Page 5 of 10
Zip tie monitor,
keyboard and
mouse cords here
Wire loom
and clip
Zip tie here to secure
CPU / Ethernet cords
to bottom of wiring tray
CPU location
Flat panel
monitor
6. Cord management
1. With the back panel removed, connect the necessary monitor, keyboard, and mouse cords above the worksurface.
2. Position the keyboard as shown approximately 6” from the front edge of the worksurface with the mouse on the
opposite side of the CPU as shown.
Figure 6A
. This will provide enough slack in the cords during normal use and
provide for left and right mouse locations. With zip ties, secure cords to the back of the keyboard tray as shown.
3. The wire loom keeps monitor and keyboard cords together and routes them while the monitor is being raised and
lowered. Using a flat head screwdriver, pry open each loom clip to release the wire loom.
Figure 6B and 6C
.
Figure 6A
Zip tie cords here to
secure to keyboard tray
Figure 6B
Figure 6C
Top View
