Note
: If you are mounting the Flip-up Shelf to a lectern with a
Handle, the Shelf and Handle can be on the same side if
preferred, but the Shelf needs to be mounted in the middle or
lower position.
A. Determine the preferred side of the lectern to locate the shelf.
B. Attach the Shelf Support/Bracket Assembly to the Lectern using (4) 1/4-20 x 15mm JC Bolts. This assembly can be mounted at
several different heights depending on the application.
Figure 2
. (This Shelf is shown in the upper position.)
Attach Shelf Support/Bracket Assembly to the Lectern
2.
Shelf Support/Bracket
Assembly
1/4 20
15mm JC Bolts
Figure 2
2" Grommet
A. Attach the Shelf to the (2) Folding Brackets with (8) #8 x 3/4" PHSM Screws
(4 per bracket) as shown in
Figure 3
. Tighten securely.
B. Install the 2" Grommet.
Attach Shelf to Folding Brackets
3.
1/4-20 x 15mm JC Bolts
(4 Req'd)
Figure 3
Shelf
#8 x 3/4" PHSM Screws
(4 per Bracket)
Folding Bracket
0103308X Page 2 of 2
