4mm hex
wrench
Tools
Required
0116157R1 Page 5 of 12
Cord management
The audience-side logo panel can be removed to provide access to internal wiring.
1. Remove the (6) 1/4-20 x 15mm JC bolts and remove the panel.
Figure 4A
.
2. Cords can be accessed through the two openings behind the panel.
3. Replace the panel when wiring is complete.
4. Route cords using the grommets and cord pass-throughs provided.
Figure 4B
.
Figure 4A
audience-side
logo panel
1/4-20 x 15mm JC bolts
(6 required)
openings
Note: Cords can be routed to different
areas of the lectern using the grommets
and cord pass-throughs provided.
Figure 4B
