8
Battery Setup
Place the batteries into the battery pack. Once the batteries are
in properly, the LCD display will turn on (for 30 seconds and turn
off automatically). The firmware version number will appear on
the LCD display when the module is first activated.
Testing Actuator
After plugging the actuator cables together, test the actuator by
pressing the DISPLAY button on the control panel until it reads
‘TEST’. Press the SET button. The actuator will rotate, press
the button and initiate the dialing of the phone.
NOTE:
If the actuator arm is not positioned so that its able to press
the button, follow directions on page 14 to reposition the ac-
tuator arm.
The second piece of Velcro
can be used to attach the
phone into the bottom of the
case.
Remove the protective cover
from the Velcro and stick to
the back of the phone, posi-
tion the phone in the case,
and stick it down. Allow a few
minutes for the adhesive to
stick to the case before re-
moving the phone.
