0118857R12 Page 8 of 20
Figure 6.2
Figure 6.3
Note: The Overbridge Control Console
™
has been designed
for many of the currently available controllers on the market,
however, modified cutouts should be reviewed by Spectrum
to ensure clearance of brackets, keyboard slides, or other
objects under the worksurface.
Contact Spectrum to specify cutout size(s) and location(s).
Cutouts can be made in the blank insert panel by the
customer after the lectern has been purchased, but are
only recommended within the cutout area shown.
Max cutout area
Overbridge panel
Wiring Channel
Overbridge
Section view B-B
Worksurface opening below
Worksurface
Freedom XRS Elite Lectern overbridge insert panel blank
(flat view)
2” Grommet
2” Grommet
