2. Install glides
0107821R5 Page 3 of 10
1. Carefully lift one side of the desk and place a short wooden 4x4 or 2x4 block (or equivalent support)
under the leg. This may require two people.
Figure 2
.
2. Thread the two glides into the leg, tighten securely, and remove block.
3. Repeat this procedure on the other side of the desk.
4. The glides can be adjusted with the included glide wrench to level the desk if necessary.
Figure 2
glide
leg
wooden
block
3. Connecting desks together (optional)
1. Desks of equal height can be connected together with the included unit-to-unit bracket.
Figure 3
.
2.
Align desks next to each other in their final location and raise monitor compartment lids.
3. Attach desks together with a unit-to-unit bracket and (4) 1/4-20 x 15mm JC bolts. Tighten bolts securely.
4. Disconnect brackets to move/relocate desks.
top view
Figure 3
unit-to-unit
bracket
Tools
Required
4mm hex
wrench
Tools
Required
glide wrench
