Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
052519R6 Page 1 of 5
Assembly Instructions
Assembly Instructions
026064 (black)
043493 (putty)
1/4-20 x 5/8” PHMS
(10) 36”, (12) 60”, 72”
Attach chair rail bracket (60” & 72” desks only)
(1) 051024
Chair rail bracket
(1) 025069
Glide wrench
Evolution Desk 30”D
Evolution Desk 30”D
(1) 036281
Dual unit-to-unit
bracket
(for 60”, and 72” desks only)
Figure 1
Flip-top
Chair rail bracket
(2) 1/4-20 x 5/8” PHMS
(for threaded inserts)
or
(2) #14 x 7/8” PHSM
(for pilot holes)
Worksurface
052463
Unit-to-unit bracket
(2) 36”, (1) 60”, 72”
026011
1/4-20 x 2” FHMS
(2) 36”, (3) 60”, 72”
(2) Leg
(1) Worksurface
(1) Chair rail
(1) Cord channel /
Modesty panel
38901ADJ - 36”W
38901ADJ - 36”W
38904ADJ - 60”W
38904ADJ - 60”W
38905ADJ - 72”W
38905ADJ - 72”W
38930 - 36”W Stand-up
38930 - 36”W Stand-up
(non ADJ legs)
(non ADJ legs)
(4) 037779
5/16-18 x 1” Glide
Assembly tip: Do not tighten component
fasteners completely until all have been
installed. Keeping them loose will help with
alignment between parts during assembly.
1. Place the worksurface face-down onto a non-abrasive surface.
2. Orient and attach the chair rail bracket to the center of the worksurface
as shown in
Figure 1
with (2) 1/4-20 x 5/8” PHM screws.
1
X2
