0106243R3 Page 3 of 4
Figure 2A
Doctorate / Masters Lectern installation
1. Open the lectern doors.
2. Attach the mounting bracket to the base panel with (2) 10-24 x 1/2” THM screws.
Figure 2A
.
3. Using the mounting bracket holes closest to the side panel, install the connector pin through the
mounting bracket and cord reel mount as shown.
10-24 x 1/2” THMS
(2 required)
base panel
Figure 2B
#8 x 7/8”
FHSM
(4 required)
cord guide
side panel
mounting
bracket
connector pin
cord reel
4. Using pliers, bend the end of the connector pin to a 90° angle to secure the assembly.
Figure 2B
.
5. Pull the reel power cord through the side panel grommet hole.
6. Slide the cord guide over the cord and align the mounting holes.
7. Attach the guide to the interior side of the panel using the (4) #8 x 7/8” FHSM screws.
pliers
bend the end
of installed
connector pin 90°
power
cord
power
cord
Note:
When installed, the cord reel takes
up 3RU from the bottom of the rack rail.
(1) 010648
cord guide
(4) 021472
#8 x 7/8” FHSM
Included with Masters / Doctorate Lecterns
