0111252 Page 2 of 4
Backer
Plate
Lectern Side
Panel
Figure 1
1. Attach Unit-to-Unit Bracket to Lectern
1. Attach Unit-to-Unit Bracket to Lectern
A.
The table is symmetrical and can be mounted on either side of the lectern. Determine
which side the table will be mounted.
B.
Attach the unit-to-unit bracket and the backer plate to the left or right side panel with (3)
1/4-20 x 5/8” PHM screws.
Figure 1
. The backer plate will be inside the lectern. Do not
tighten the screws completely-they will be tightened after the table is connected.
1/4-20 x 5/8”
PHM screws
(3 req’d)
Unit-to-Unit
Bracket
